R&S ENY-FTS
Maintenance
Operating Manual 1309.8949.14 - 0
2
18
4 Maintenance
The R&S ENY-FTS does not require special maintenance. Users need only take care
to keep the equipment clean and protect the components against mechanical damage.
The connectors have only a limited number of insertion/withdrawal cycles. If the
connectors show signs of wear, you should have Rohde & Schwarz Service replace
the connectors. Users are not permitted to modify the device.
Clean the instrument housing using a dry cloth. For heavy dirt, use a damp cloth with a
mild, non-abrasive household cleanser if necessary. Do not let liquid enter the housing
of the device. No chemicals may be used for cleaning purposes.
4.1 Spare parts
For the Adapter Set R&S ENY-FTS the following spare parts are available::
Sachnummer
Designation
Comment
1309.8710.03
BMB-1000
LCL Balance Measurement Bridge, 100 kHz to 100 MHz
1309.8890.00
A-REFLOAD
Reference Load for LCL Measurement Bridge (LCL ca. 55 dB)
1309.8478.00
A-CALLOAD
Calibration Load for Balance Measurement Bridge (0 dB)
1309.8484.00
A-TERMINATION
Termination for Balance Measurement Bridge (100
C
)
1309.8678.00
A-OPEN
Termination for ISN (D-Sub 25, Open)
1309.8684.00
A-SHORT
Termination for ISN (D-Sub 25, Short)
1309.8855.00
A-50
Termination for ISN (BNC, 50
C
)
1309.8690.00
A-150
Termination for ISN (D-Sub 25, 150
C
)
1309.8849.00
A-800
Termination for ISN (D-Sub 25, 100
C
for each pair of wires)
1309.8278.00
A-801
Termination for ISN (RJ45, 100
C
for each pair of wires)
1309.8661.00
SAR M116
Adapter, 4-mm-Banana
1309.8449.00
SAR T2x0
Common Mode Adapter for 2-Wire-ISN, 1mm Banana
1309.8455.00
SAR T4x0
Common Mode Adapter for 4-Wire-ISN, 1mm Banana
1309.8461.00
SAR T8x0
Common Mode Adapter for 8-Wire-ISN, 1mm Banana
1309.8990.00
SAR T602
Common Mode Adapter for RJ11
1309.8884.00
SAR T801
Common Mode Adapter for D-Sub 25
(2x) 1309.8932.00
2x SAR T802
Common Mode Adapter for RJ45
1309.8810.00
Jig IMA U0
Impedance Measurement Adapter (0
C
)
1309.8378.00
Jig CAL
U100B
Calibration Adapter (100
C
)
1309.8803.00
Jig LCL-Probe
Measurement Adapter for LCL Balance Measurement Bridge
1309.8284.00
Jig TRA U0-150
Termination Adapter for Calibration (150
C
and Short)
Содержание ENY21
Страница 14: ...R S ENY FTS Inhaltsverzeichnis Betriebshandbuch 1309 8949 14 02 4...
Страница 50: ...R S ENY FTS Contents Operating Manual 1309 8949 14 02 4...
Страница 66: ......
