manualshive.com logo in svg

R&S ENV216, Руководство пользователя

Поделиться
Скачать
R&S ENV216 Скачать руководство пользователя страница 17

Preparing for Use

R&S

®

ENV216

17

User Manual 5201.6693.14 ─ 04

1.

DANGER! 

Risk of electric shock. Before you connect the V-network to the

power source, you have to connect the R&S

 

ENV216 to a protective ground

terminal. An unearthed R&S

 

ENV216 is live. Touching a live electrical device

causes serious personal injury, or even death.
The protective ground connection must remain until you have disconnected
the V-network from the power supply.
Connect the R&S

 

ENV216 to the mains power supply.

2. If the phase connection is made correctly, LED L1 (1) must light up.

If it does not:
● For mains plugs with symmetrical grounding connection (e.g. Schuko

plugs) the plug's polarity must be reversed.

● For mains plugs with asymmetrical grounding connection, phase L1 and

neutral N must be swapped by reconnecting.

● For country-specific sockets see 

Chapter A, "Country-specific Connector

Models"

, 

on page 34.

The plug on the mains cable can be adapted using a country-specific adapter.

Connecting to Power

Содержание ENV216




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды