LXI (R&S AFQ100B only)
R&S
®
AFQ100A, R&S
®
AFQ100B
5
Supplement 1175.6978.02 ─ 04
► Press the "Inactive (press to toggle)" button to activate the connection.
A green flashing status LED indicates the active connection. If the LAN connection
fails, the LED turns red.
The status of the LAN connection is also indicated by the "LAN Status indicator" in
the "LXI Status" dialog.
The "Device Indicator" setting is not password-protected.
For further information, see section
Chapter 1.2, "LXI Status"
,
on page 10.
The navigation pane of the browser interface contains the following control elements:
●
"LAN Configuration" opens the LAN Configuration page.
●
"LXI Glossary" opens a document with a glossary of terms related to the LXI stan-
dard.
●
"Status" displays information about the LXI status of the instrument.
1.1.2 LAN Configuration
The "LAN Configuration" web page provides access to the parameters required for
identifying the R&S
AFQ in the network, and allows modification.
Password protection
Changing the LAN configuration is password-protected. The default password is
Lxi-
WebIfc
(notice upper and lower case characters). This password cannot be changed in
the current firmware version.
It comprises the following navigation entries.
●
IP Configuration
........................................................................................................ 5
●
Advanced LAN Configuration
....................................................................................6
●
Ping Parameter
......................................................................................................... 7
●
Web Control
.............................................................................................................. 8
●
SCPI Remote Trace
..................................................................................................9
1.1.2.1
IP Configuration
The "IP Configuration" page displays all mandatory LAN parameters.
LXI Configuration