Remote Control
R&S
®
AFQ100A, R&S
®
AFQ100B
11
Supplement 1175.6978.02 ─ 04
LAN Status
The LED indicates the LXI status.
The LAN Status is also indicated with the LED "LAN Status" on the front panel of the
instrument.
"green"
normal operation
"green (flashing)"
device identification
"red"
LAN fault
LAN Reset
Initiates the network configuration reset mechanism for the instrument and resets the
hostname, MAC address, and IP address.
Alternatively, the LAN RESET button on the front panel of the instrument can be used.
To initiate the network configuration reset, press the button longer than 4 sec and wait
for the signal tone.
See
"Default state of the network settings"
on page 2 for information on the reset
parameters.
To open the "Instrument Home Page" (welcome page), type the instrument's computer
name (host name) or IP address in the address field of the browser on your PC, e.g.
http://10.111.10.205
.
Note:
A LAN reset may require an instrument reboot.
2 Remote Control
Refers to "Putting into Operation > Manual Remote Control via an External Controller"
in the Operating Manual.
