SERGE-MODULAR.COM
SERGE
MODULAR
11
•
Set SMPL switch to SMPL (top)
•
RED Coupler
RUN on the right
•
Keyboard GATE OUT
ExtADSR (or DSG) for Envelope
•
ExtADSR OUT
VC RATE of right GTO, VC RATE attenuverter fully CW
•
Right GTO: Rate knob at about 50%
•
Listen to right GTO OUT .
SYNC FM
•
CYLCE both sides of the GTO .
•
Set SMPL switch to Cycle (center) or INV
•
Right OUT
left VC RATE (RATE attenuverter set to about 2 p .m .)
•
Keyboard 1V/OCT
both left and right 1V/OCT (but don’t expect the patch to track!)
•
Right CYCLE out
SYNC
Variations:
•
Send left GATE OUT to RUN and set SMPL switch to SMPL or INV
SYNC DRONE
Again, using both sides combined as one massive oscillator .
•
CYLCE both sides of the GTO .
•
Left CYCLE
RUN
•
Right CYCLE out
SYNC
•
Right CYCLE out
right VC RATE
•
Set SMPL switch down (“INV”) .
•
Keyboard 1V/OCT
left and right 1V/OCT of the GTO .
•
Adjust the RATE of the left side to tune the left side to be one octave (or 2 octaves, or 5 semitones or . . .)
higher than the right side .
•
Send ADSR or LFO to left VC RATE with VC RATE knob close to center .
•
Alternatively, send black COUPLER to left VC RATE with VC RATE knob close to center .
•
Use right RATE knob to adjust pitch .
•
Listen to left OUT (green) or red COUPLER (orange) - yellow wave is a mix of left OUT and COUPLER:
