SERGE-MODULAR.COM
SERGE
MODULAR
10
Serge GTO - Patch Ideas
Sync’d VCO
Using both sides combined as one tracking oscillator .
•
CYLCE both sides of the GTO .
•
Set SMPL switch to center (“free”) .
•
Keyboard 1V/OCT
left and right 1V/OCT of the GTO .
•
Adjust the RATE of the left side to tune the left side to be one octave (or 2 octaves, or 5 semitones or . . .)
higher than the right side .
•
Right CYCLE out
left SYNC input .
•
Listen to left OUT or red COUPLER .
Metallizing VCA
Use a PCO or NTO (or another GTO) as a sound source, the right side of GTO as filter / VCA, however, scrambled
by the left GTO:
•
SAW (or PULSE, TRI)
GTO right side IN .
•
CYLCE left side of GTO
•
CYCLE out (left)
RUN on the right
•
Keyboard 1V/OCT
PCO 1V/OCT and left GTO 1V/OCT
•
Keyboard GATE OUT
ExtADSR (or DSG) for Envelope
•
ExtADSR OUT
VC RATE of right GTO, VC RATE attenuverter fully CW
•
right GTO: Rate knob at about 40%
Variations:
1 .
SYNC: Send PULSE OUT of PCO to GTO SYNC input .
2 .
(b) Send 2nd output of PCO to 1V/Oct of right GTO
3 .
(c) Send envelope from ExtADRS also to VC-RATE of GTO (left), VC-RATE attenuverter near center .
Geometric Waveshapes:
•
Send a SAW wave from a PCO or NTO or DSG
GTO left side SYNC and
GTO right side SMPL .
•
Keyboard 1V/OCT
PCO 1V/OCT and left GTO 1V/OCT
•
CYLCE left side of GTO
•
Do not CYLCE right side of GTO
•
CYCLE out (left)
IN on the right
