R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
Page | 8
Picture 35
Picture 36
Picture 37
Picture 38
FITTING INSTRUCTIONS
•
Remove the 2 tank cover panel bolts from both sides of the bike arrowed in picture 1. Pull the panel up gently
until the locating pins release.
•
Remove the bolt shown in picture 2 from the bottom of the nose.
•
Remove the bolts arrowed in pictures 3 and 4 from underneath the lower fairings.
•
Remove the radiator shroud bolt shown in picture 5 from both sides.
•
Remove the rear fairing bolts from the right and left sides of the bike as shown in pictures 6 and 7 respectively.
•
Remove the 3 lower to upper fairing bolts arrowed in picture 8 from both sides of the bike. The lower fairing can
be removed from both sides at this stage by gently separating it from the radiator shroud.
•
Remove the bolts shown in pictures 9 and 10.
•
Slide the black inner fairing panel (previously secured with the bolts in pictures 9 and 10) forwards until the
clips disengage. To release the clip at the front, pull the black cover marked with the red arrow in picture 10 in
