Page
11
of
24
LP0264
R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
•
Place the pre-fitted tail bracket spacers into the recesses left by the OEM unit and use
your 5mm allen key to affix to the bike using the 4 x M8 spacers (item 5) and 4 x 20mm
M8 Button head bolts (item 4) as shown in picture 18.
•
After re-routing the wires as they were originally removed, re-connect the indicators and
number plate light to the original connectors on the main wiring loom. Ensuring the
correct indicator is connected to the corresponding side as in picture 19.
•
At this point, turn on the ignition and check all lights function correctly, if lights fail to
illuminate, check connections. If indicators do not illuminate, swap the bullet connectors
round.
•
Use cable ties (item 10) through the holes in the tail bracket to secure the indicator and
light wires and ensure this is neat and hidden from sight. You may wish to use the self-
adhesive cable clips (item 12) to aid this.
•
Tidy the wiring on the inside of the bike using the OEM cable tie, ensure the wires do not
interfere with seat mounts.
•
Check all bolts and screws are tightened to the correct torque.
•
Re-attach both seats as they were removed
•
Mount the licence plate (it may require drilling) to the rear of the bracket low enough so
that it does not cover the indicators.
•
IMPORTANT: IF FITTING A FULL-SIZE LICENCE PLATE AND PLACING IT FAR
DOWN ON THE LICENCE PLATE HANGER, THERE IS A SMALL CHANCE OF THE
LICENCE PLATE HITTING THE BACK WHEEL UNDER HEAVY LOAD AND OVER
LARGE BUMPS IN THE ROAD. IT IS YOUR RESPONSIBILITY TO CHECK FOR THIS
POSSIBILITY AND TAKE AVOIDING ACTION. FAILURE TO CHECK THIS COULD
RESULT IN SERIOUS INJURY.
•
Depending on local laws, attach enclosed reflector (item 13) in an appropriate location
•
Retest the licence plate illuminator and all lights before riding.
ISSUE 1 18/03/19 (DM)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make
design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform
to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply
to the Products other than those in R&G’s order or confirmation and the Buyer confirms it has
chosen the Products as
being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other
services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been
disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the
Products. On return of any defective Products R&G shall at its option either supply a replacement or refund the purchase
money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance
with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect.
Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not
be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for
the Products or the fitting or service concerned. These terms do not affect t
he Buyer’s statutory rights.
R&G RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to
us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original
vendor. Goods must be in re-sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and
handling fee (25% of the gross value exc. P&P
–
at the prevailing price at time of purchase). The customer must pay
any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does
not affect your statutory rights and does not refer to faulty goods.
