Randell 9215-32-7, Руководство оператора

Страница: 15 / 27

Unifiedbrands.net
15
Preventive Maintenance
Unified Brands strongly suggests a preventive maintenance program which would
include the following Monthly procedures:
1. Cleaning of all condenser coils. Condenser coils are a critical component in the
life of the compressor and must remain clean to assure proper air flow and heat
transfer. Failure to maintain this heat transfer will affect unit performance and
eventually destroy the compressor. Clean the condenser coils with coil cleaner
and/or a vacuum cleaner and brush.
NOTE: Brush coil in direction of fins, normally vertically as to not damage or
restrict air from passing through condenser.
2. Clean fan blades on the condensing unit and evaporator assembly.
3. Clean and disinfect drain lines and evaporator pan with a solution of warm water
and mild detergent.
4. Clean all gaskets on a weekly if not daily basis with a solution of warm water
and a mild detergent to extend gasket life.
5. Lubricate door hinges with lithium grease.
NOTE: DO NOT USE SHARP UTENSILS AND/OR OBJECTS.
RECOMMENDED CLEANERS FOR YOUR STAINLESS STEEL INCLUDE THE
FOLLOWING:
JOB CLEANING AGENT COMMENTS
Routine cleaning
Soap, ammonia, detergent
Medallion
Apply with a sponge or cloth
Fingerprints and smears Arcal 20, Lac-O-Nu, Ecoshine Provides a barrier film
Stubborn stains and
discoloration Cameo, Talc, Zud, First
Impression Rub in the direction of the
polish lines
Greasy and fatty acids,
blood, burnt-on foods Easy-Off, Degrease It, Oven
Aid Excellent removal on all
finishes
Grease and Oil
Any good commercial
detergent
Apply with a sponge or cloth
Restoration/Preservation Benefit, Super Sheen Good idea monthly
Reference: Nickel Development Institute, Diversey Lever, Savin, Ecolab, NAFEM.
NOTE: Do not use steel pads, wire brushes, scrapers, or chloride cleaners
to clean your stainless steel. CAUTION: DO NOT USE ABRASIVE
CLEANING SOLVENTS, AND NEVER USE HYDROCHLORIC ACID
(MURIATIC ACID) ON STAINLESS STEEL.