Rand McNally tnd 760 Скачать руководство пользователя страница 51

Страница: 51 / 60

TND

™

765 & TND

™

760 User Manual

Troubleshooting

No power or intermittent

power loss:

Check power connection

Ensure that the cable is secured to the device.
Reestablish the cable connections by unplugging

them, then plugging them back in. Make sure

locking collar is turned.

Unable to register:

Verify your customer number (Customer #)

If you have questions about your customer

number, please call Customer Support at

1-800-641-RAND (7263)

Unable to send and receive

messages:

Check communications

Look for any crossed-out icons on the lower

right hand corner of the screen.
Move the truck to ensure that the issue is not

signal interference.

Restart the device

Restart the device by first logging off, then press-

ing the Power button. This will cause the device

to reset and reconnect.

Unable to connect cellular modem,

GPS, or Wi-Fi®:

Check communications

Move the truck to ensure that the issue is not

signal interference.

Restart the device

Restart the device by first logging off, then press-

ing the Power button. This will cause the device

to reset and reconnect.

Nothing appears on device:

Check connections

Ensure that the cable is secured to the device.

Screen not responding:

Calibrate the touch screen

Hold down the Home button on the bottom right

corner of your device for 5 seconds. This will

cause the Calibration screen to come up. Follow

the instructions provided on the screen.

Restart the device

Restart the device by pressing the Power button.

This will cause the device to reset and reconnect.

J-bus not responding

Check connection
Make sure truck ignition is on
Restart the engine
Restart the device

Restart the device by first logging off, then press-

ing the Power button. This will cause the device

to reset and reconnect.

Stuck in Splash Screen:

Perform Home Menu Restart

If the login screen does not come on after 2

minutes of powering up the device, power off

the unit. Press and hold the Home Menu button

while pressing the Power button at the same

time, keeping the home button pressed until you

see the calibration screen come up.

To assist you with troubleshooting, please refer to the list of possible solutions below.
If you still encounter issues with your device, please call Rand McNally Customer Support at 1-800-641-RAND (7263).

Содержание tnd 760





























































Результаты поиска

Содержание tnd 760

Отзывы:

Похожие инструкции для tnd 760

Бренды по названию

Популярные бренды

Rand McNally tnd 760, Руководство пользователя

Результаты поиска

Содержание tnd 760

Отзывы:

Похожие инструкции для tnd 760

Бренды по названию

Популярные бренды