Rancilio EGRO 5511, Техническое руководство

Страница: 66 / 70

EGRO 5511 Manual
1. 1.
Insert a programming key into the slot on the front door,
below the touchpad. Turn the key to the right.
Press button
4
(
P15
).
The machine will ask for a PIN number.
Press the buttons
1
-
8
-
4
-
9
. This will unlock the machine and
allow you into programming mode.
2. 2.
The screen will read “ Product Total ”. Press button
5
two
times .
The screen will read “ Config 1 ”. Press button
1
two times .
3. 3.
You are now in the grinders menu.
Use button
5
to scroll forward through this menu.
Use button
3
to scroll backward .
There are four options in the grinders menu:
·
Gl Sec/10Gr #.#
(Left grinder grinding time, in seconds)
· Gr Sec/10Gr #.#
(Right grinder grinding time, in seconds)
· Grinder l Test?
(Test the left grinder for the set grinding time)
· Grinder r Test?
(Test the right grinder for the set grinding time)
Press button
5
two times . The screen will read “ Grinder l
Test? ”
Remove the screw holding the front door in place (
P16
).
Swing the front door open.
4. 4.
Place a cup under the left grinder chute to catch the
grounds (
P17
). Press button
1
to run the left grinder test.
Run three tests and discard the coffee grounds. Run a fourth
test, and weigh it.
Note: Using the fourth grinder test after each adjustment will ensure that
the grounds weight is accurate.
DIALING IN 10 GRAMS
This section is critical to the proper function of the Egro 5511. It gives the machine an
accurate starting point for drink products.
* Anytime the roast of espresso or the espresso brand is changed, you will need to dial in 10 grams *
Touchpad, with buttons labeled and circled
P
1
5
1
3
5
7
9
2
4
6
8
0
P
1
6
Front
door
screw
P
1
7
Grinder chutes, circled
CONTINUED ON FOLLOWING PAGE
Page 65