RANCHO RS66505B, Инструкция по установке

Страница: 6 / 19

6
FRONT SUSPENSION
Illustration 1 Illustration 2
V
EHICLE
P
REPARATION
& S
WAY
B
AR
R
EMOVAL
1)
Park the vehicle on a level surface. Set the parking
brake and chock rear wheels. Measure and record the
distance from the center of each wheel to the top of the
fender opening. See Illustration 3.
Illustration 3
2)
Raise the front of the vehicle and support the frame
with jack stands. Remove the front wheels and set them
aside.
3)
If applicable, remove the front splash shields and / or
skid plates. Remove splash shield brackets from side of
frame rails. See Illustration 4 and Illustration 5.
4)
Hold the hex stud and remove the nut attaching the
sway bar end link to the sway bar. See Illustration 2 and
Illustration 6. Repeat for other side.
5) Remove the four nuts holding the sway bar to the
frame. Remove the sway bar assembly. See Illustration 6.
Illustration 4
Illustration 5
Lower Control Arm
Upper Control Arm
Steering Knuckle
Caliper
Rotor
Tie Rod End
Upper Shock Mount
Lower Shock Mount
Axle Nut
Sway Bar
Lower Control Arm
Upper Control Arm
Caliper
Rotor
Steering Knuckle