14
Illustration 34
2)
Attach new Rancho shock absorbers to the upper and
lower mounts. Torque to 100 ft. lbs.
3)
Repeat steps 4 and 5 for passenger side.
B
RAKE
L
INE
/
S
WAY
B
AR
B
RACKET
I
NSTALLATION
1)
Install brake line/sway bar drop bracket RS176698 to
frame using OE brake line mounting bolt and M12 hardware
from kit RS860730. Torque OE bolt to 18 ft. lbs. and M12
hardware to 55 ft. lbs.
2)
Attach sway bar end links to drop bracket RS176698
using OE hardware. Torque to 55 ft. lbs
3)
Attach brake-line wire hanger to drop bracket
RS176698 using supplied M8 hardware form kit RS860730.
Torque to 18 ft. lbs.
4)
Reattach ABS cable using supplied tie wraps. See
Illustration 35.
Illustration 35
5)
Install rear wheels and lower vehicle to ground.
Tighten lug nuts to 130 ft. lbs.
6)
Reinsert original track bar bolt into axle bracket.
Tighten to 110 ft. lbs. See Illustration 36.
Illustration 36
FINAL CHECKS & ADJUSTMENTS
1)
Turn the front wheels completely left then right.
Verify adequate tire, wheel, and brake hose clearance.
Inspect steering and suspension for tightness and proper
operation.
2)
With the suspension at maximum extension (full
droop), inspect and rotate all axles and drive shafts. Check
for binding and proper slip yoke insertion. The slip yoke
should be inserted a minimum of one inch into the transfer
case and/or transmission.
3)
Ensure that the vehicle brake system operates
correctly. If new brake hoses were installed, verify that
each hose allows for full suspension movement.
4)
Readjust headlamps.
5)
Have vehicle aligned at a certified alignment facility.
Recommended Alignment Specifications
Caster (degrees): 3.75° ± .75°
Camber (degrees): 0° - .3°
Sum Toe In (degrees): .1° ± .1°
Front
OE Hardware
Brake Line Hanger
ABS Cable
End Link
RS176698
