RANA Systems Elite Controller, Руководство пользователя

Страница: 253 / 328

ELITE SERIES USER MANUAL ENHANCED CP/M UTIL.
Once the copying is finished (single or two—
drive), COPY will say:
COPY Complete
Do you wish to make another copy?
If you answer <N><RETURN> to this question, COPY
will terminate. COPY’s response to your answer-
ing <Y><RETURN> to this question depends upon
whether you did a full diskette copy or a sys-
tem-only copy.
If you did a full diskette copy, COPY will ask
for the diskettes to be copied just like it did
the first time. If you did a system—only copy,
COPY will only ask for the target diskette. This
is because COPY was able to fit all of the
system information it is copying into memory at
one time. Therefore it does not need to read it
again off of the source diskette a second time.
Once you answer <N><RETURN> to the another
copy?” question, COPY will check to see if you
used drive A: anytime during your copying. If
you did, it will prompt you with:
Insert CP/M System disk into drive A:
Hit RETURN
This is just a reminder in case you removed the
CP/M system diskette to make a copy of some
other diskette. When the CP/M system diskette is
in drive A:, press <RETURN> and COPY will
terminate.
P a g e 1 0 — 2 2