RANA Systems Elite Controller Скачать руководство пользователя страница 230

Страница: 230 / 328

ELITE SERIES USER MANUAL

ENHANCED DOS UTIL.

Since “dumb’ FID will work with Disk II and

Elite One diskettes correctly, you need to

create a Disk II or Elite One diskette

containing FID on it. The run FID and specify

menu item 1 (copy files) in order to copy FID

ENHANCE onto the same diskette as "dumb" FID.

For more information on using FID, refer to your

DOS manual.

Once FID and FID ENHANCE are on the same

diskette, simply type:

BRUN FID ENHANCE

to begin the modifications.

FID ENHANCE does not ask you anything. The

first things it does is issue a “BLOAD FID”

command to DOS in order to load FID into memory

(FID must be on the diskette, or DOS will inform

you of the error).

Once DOS has loaded FID into memory, FID ENHANCE

will perform the necessary “teaching” and then

issue a BSAVE FIDR" to DOS to save the new

“smart” FID under the name of FIDR. The “R” on

the end indicates it is the Rana modified copy

of FID.

FIDR can then be used exactly like the original

FID, except FIDR is completely compatible with

the entire Elite Series drive line and also the

four drives of the Elite Controller.

P a g e 9 — 3 3

Содержание Elite Controller









































































































































































































































































































































Результаты поиска

Содержание Elite Controller

Отзывы:

RANA Systems Elite Controller, Руководство пользователя, Страница: 230 / 328

Результаты поиска

Содержание Elite Controller

Отзывы: