RANA Systems Elite Controller Скачать руководство пользователя страница 220

Страница: 220 / 328

ELITE SERIES USER MANUAL

ENHANCED DOS UTIL.

configuration table on the source diskette must

be set (using PROFILE) correctly for the boot

slot and drive prior to copying the DOS to the

destination diskette. The other option is to use

PROFILE to change the table setting on the

destination diskette after the copy has been

made, but PROFILE will require that the drive

containing the DOS to he changed be defined (in

the currently hooted DOS) to match the way the

DOS is structured on the diskette.

CLONE will allow you (under certain conditions)

to copy a DOS image onto a diskette using a

structure specified by you which does not neces-

sarily match the way in which the diskette was

originally formatted. You should never do this.

This will either immediately destroy one or more

of the files on the destination diskette, or the

diskette will stop booting as soon as a new file

manages to overwrite the DOS on the diskette.

P a g e 9 — 2 3

Содержание Elite Controller









































































































































































































































































































































Результаты поиска

Содержание Elite Controller

Отзывы:

RANA Systems Elite Controller, Руководство пользователя, Страница: 220 / 328

Результаты поиска

Содержание Elite Controller

Отзывы: