11
www.DentalEZ.com
866-DTE-INFO (opt 4)
11
www.DentalEZ.com
Muffler Installation
Tools needed:
•
5/16” nut driver or flathead screwdriver
Section II Installation
To prevent any chance of electrical shock,
always disconnect power when indicated.
WARNING
1.
To install the muffler assembly, slide the assembly all the way down onto the pre-installed
silencer.
NOTE:
Following the directional arrows making sure that the flow arrow is pointed upwards.
2.
Use
a
5/16” nut driver or flathead screwdriver to tighten the bottom hose clamp so that the muf
-
fler is tightly seated onto the silencer.
Hose Clamp
Muffler
Assembly
Silencer
Muffler Assembly
Installed Muffler