MAINTENANCE
MAINTENANCE
14
Always make sure the tool is not loaded before performing any service or repair
and always wear safety goggles when cleaning or servicing the tool.
NORMAL CLEANING
All front end parts shown in the disassembly section are to be cleaned daily
with a good detergent oil and wire brush. Remove all dirt and carbon buildup
and wipe parts dry with a clean rag. Check all parts for wear or damage before
reassembly and replace or repair any worn or damaged parts.
COMPLETE CLEANING / GENERAL MAINTENANCE
Heavy use or constant exposure to dirt and debris may require that the tool
be cleaned more extensively. Complete disassembly and cleaning of all parts
may be necessary to restore the tool to normal operation. General maintenance
should be performed every six months or more often if the tool is subjected to
heavy use. Contact your authorized Ramset Distributor for assistance.
IMPROPERLY MAINTAINED TOOLS CAN CAUSE SERIOUS INJURIES
TO TOOL OPERATOR AND BYSTANDERS
CLEAN TOOL DAILY
ALWAYS FUNCTION TEST THE TOOL AFTER PERFORMING ANY
SERVICE. SEE PAGE 9 FOR DETAILS ON THE FUNCTION TEST.
MAINTENANCE
Содержание ROCKET TOOL
Страница 12: ...PARTS SCHEMATIC PARTS SCHEMATIC 12...
