RA27 SERVICE
BACK END / ADVANCE LEVER
18. The next series of photos show
the disassembly of the Mech.
Housing assembly.
Note the use of grease in areas
of movement. As the parts are
cleaned and reassembled, the
grease should be applied in these
areas for smooth operation. A
white lithium grease or similar
with a wide working temperature
of 0°F to 300°F or better should
be used.
CRC SUPER WHITE™ MULTI-PURPOSE
LITHIUM GREASE
No. SL3150
19. Note the Releaser and Releaser
Spring. Note the orientation on
the ends of the spring. The photo
below shows a different installed
view. The releaser is pointed at
the 12 ‘o-clock position, with the
spring ends holding it in position
20. Firing pin, Releaser and Releaser
spring removed.
