SAFETY PRECAUTIONS
1
SAFETY PRECAUTIONS
WARNING!
The following pages contain detailed warnings,
cautions, and rules of safe operation with which the
operator must be familiar and follow to avoid serious injury or death. After thorough-
ly reviewing this manual, complete the Operator's Exam and return to ITW Brands for
your Operator's Card and to activate your warranty.
BEFORE LOADING AND FIRING PROTECT YOURSELF AND OTHERS
1. Never place your hand or fingers over the
front muzzle of the tool - the fastener or
piston can seriously injure your hand in
the event of an accidental discharge.
2. Always use only Ramset fasteners and
loads at all times for consistent tool
functioning.
3. Operators and bystanders must wear
eye and hearing protection at all times.
Serious eye injury and hearing loss can
result if proper gear is not worn.
4. Keep work area clear and where required
always
post warning signs when using
the tool. Sign should state, "Powder
Actuated Tool in Use" and can be obtained
by contacting Technical Services at
1-877-ITW-BRANDS (1-877-489-2726).
IMPORTANT:
In order to activate your warranty, you must read this
manual thoroughly, complete the exam and return to the address on
the back page of this manual.
