- 07 -
Impact Driver/Wrench 18V
Owners Manual
English |
15
Bosch Power Tools
1 609 92A 2CU | (2.11.16)
13
Carrying strap
14
Double bit*
15
Universal bit holder*
16
Screwdriver bit*
17
Application tool (e. g. an impact socket)*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Impact
Driver/Wrench
CBIDW18
Rated voltage
V=
18
No-load speed
– Setting 1
– Setting 2
– Setting 3
min
-1
min
-1
min
-1
0 – 1300
0 – 2000
0 – 2800
OBJ_BUCH-2047-002.book Page 15 Wednesday, November 2, 2016 3:55 PM
16
| English
1 609 92A 2CU | (2.11.16)
Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according to EN
60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95
dB(A); Sound power level
106
dB(A). Uncertainty K
=3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN
60745:
Impact tightening of fasteners of the maximum capacity of the
tool: a
h
=13.5
m/s
2
, K=1.5
m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with anoth-er.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
sig-nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
acces-sories, keep the hands warm, organisation of work
patterns.
Use only the battery chargers listed on the accessories
page.
Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
Note:
The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
Impact rate
– Setting 1
– Setting 2
– Setting 3
min
-1
min
-1
min
-1
0 – 1100
0 – 2600
0 – 3200
Maximum torque, hard screwdriving
application according to ISO 5393
– ¼" hexagon socket
–
½"
Nm
Nm
170
185
Bolt size
mm
M6 – M16
Tool holder
¼" hexagon
socket/
½"
Weight according to EPTA-Procedure
01:2014
kg
1.4 - 1.9
Battery
Permitted ambient temperature
– when charging
– during operation*
– during storage
°C
°C
°C
0...+45
– 20...+50
– 20...+60
Recommended batteries
CBBAT18
...
* Limited performance at temperatures <0 °C
Cordless Impact Screwdriver
OBJ_BUCH-2047-002.book Page 16 Wednesday, November 2, 2016 3:55 PM
16
| English
1 609 92A 2CU | (2.11.16)
Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according to EN
60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95
dB(A); Sound power level
106
dB(A). Uncertainty K
=3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN
60745:
Impact tightening of fasteners of the maximum capacity of the
tool: a
h
=13.5
m/s
2
, K=1.5
m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with anoth-er.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
sig-nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
acces-sories, keep the hands warm, organisation of work
patterns.
Use only the battery chargers listed on the accessories
page.
Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
Note:
The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
Impact rate
– Setting 1
– Setting 2
– Setting 3
min
-1
min
-1
min
-1
0 – 1100
0 – 2600
0 – 3200
Maximum torque, hard screwdriving
application according to ISO 5393
– ¼" hexagon socket
–
½"
Nm
Nm
170
185
Bolt size
mm
M6 – M16
Tool holder
¼" hexagon
socket/
½"
Weight according to EPTA-Procedure
01:2014
kg
1.4 - 1.9
Battery
Permitted ambient temperature
– when charging
– during operation*
– during storage
°C
°C
°C
0...+45
– 20...+50
– 20...+60
Recommended batteries
CBBAT18
...
* Limited performance at temperatures <0 °C
Cordless Impact Screwdriver
OBJ_BUCH-2047-002.book Page 16 Wednesday, November 2, 2016 3:55 PM
16
| English
1 609 92A 2CU | (2.11.16)
Bosch Power Tools
Noise/Vibration Information
Measured sound values determined according to EN
60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 95
dB(A); Sound power level
106
dB(A). Uncertainty K
=3
dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN
60745:
Impact tightening of fasteners of the maximum capacity of the
tool: a
h
=13.5
m/s
2
, K=1.5
m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with anoth-er.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
sig-nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
acces-sories, keep the hands warm, organisation of work
patterns.
Use only the battery chargers listed on the accessories
page.
Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
Note:
The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
Impact rate
– Setting 1
– Setting 2
– Setting 3
min
-1
min
-1
min
-1
0 – 1100
0 – 2600
0 – 3200
Maximum torque, hard screwdriving
application according to ISO 5393
– ¼" hexagon socket
–
½"
Nm
Nm
170
185
Bolt size
mm
M6 – M16
Tool holder
¼" hexagon
socket/
½"
Weight according to EPTA-Procedure
01:2014
kg
1.4 - 1.9
Battery
Permitted ambient temperature
– when charging
– during operation*
– during storage
°C
°C
°C
0...+45
– 20...+50
– 20...+60
Recommended batteries
CBBAT18
...
* Limited performance at temperatures <0 °C
Cordless Impact Screwdriver
OBJ_BUCH-2047-002.book Page 16 Wednesday, November 2, 2016 3:55 PM
