RAMROD MINI SKID TASKMASTER Series Скачать руководство пользователя страница 5

Страница: 5 / 37

--1. SAFETY---------------

OPERATE MINI-SKID SAFELY

IMPROPER OPERATION OF THIS MINI-SKID MAY RESULT IN SERIOUS INJURY. BEFORE

OPERATING THIS MINI-SKID, OPERATORS MUST HAVE PROPER INSTRUCTIONS, BE

FAMILIAR WITH THE SAFETY PRECAUTIONS, AND HAVE READ THIS AND THE ENGINE

MANUFACTURER'S MANUAL THOROUGHLY.

THIS SAFETY ALERT SYMBOL

POINTS OUT IMPORTANT

SAFETY PRECAUTIONS.

OPERATORS MUST UNDERSTAND CAPABILITIES AND LIMITATIONS OF THE EQUIPMENT,

WITH RESPECT TO SPEED, BRAKING, STEERING, STABILITY AND LOAD CHARACTERISTICS

BEFORE STARTING TO OPERATE.

NEW OPERATORS MUST CHECK ALL CONTROLS IN A SAFE, OPEN AREA BEFORE STARTING

WORK.

WARNING

IMPORTANT

This Decal Advises Of Acti ons Or

Danger Which Can Cause Pers onal

Injury.

This Decal Identifies Pr ocedures

Which Must Be Foll owed To Prevent

Damage To The Mini-Skid.

JULY 1998

SAFETY PRECAUTIONS

READ YOUR OWNER'S MANUAL AND ALL SUPPLEMENTS BEFORE OPERATING YOUR

MINI-SKID.

WHEN LEARNING TO OPERATE, PROCEED SLOWLY AND CAREFULLY.

WEAR CLOSE FITTING PROTECTIVE CLOTHING AND SHOES.

DO NOT PLACE FEET UNDER THE PLATFORM.

DO NOT OPERATE ANY OF THE CONTROL LEVERS INCLUDING AUXILIARY POWER

TAKE-OFF UNLESS YOU ARE STANDING WITH BOTH FEET ON THE PLATFORM AND

FIRMLY HOLDING THE GRIP HANDLES.

DO NOT JERK THE CONTROL LEVERS, USE A STEADY EVEN MOTION.

- 1 -

RAMROD TASKMASTER

Содержание MINI SKID TASKMASTER Series






































Результаты поиска

Содержание MINI SKID TASKMASTER Series

Отзывы:

Похожие инструкции для MINI SKID TASKMASTER Series

Бренды по названию

Популярные бренды

RAMROD MINI SKID TASKMASTER Series, Руководство оператора

Результаты поиска

Содержание MINI SKID TASKMASTER Series

Отзывы:

Похожие инструкции для MINI SKID TASKMASTER Series

Бренды по названию

Популярные бренды