RAMROD MINI SKID 550T, Руководство оператора

Страница: 15 / 37

--OPERATION--------------
2. As soon as the bucket is full, tilt bucket back and
back away from the pile, as shown in
Figure 13
and 14.
3. When dumping, raise bucket high enough to clear
stock pile or sides of container being loaded.
4. Drive slowly forward until bucket is over dumping
area and tilt bucket forward until it completely
empties.
5. Tilt bucket, back up if necessary to clear container
side and back away.
& WARNING &
Use Extreme Caution When Stopping.
If The Bucket Or Attachment Is Raised,
The Machine Can Tip. Keep All
Movements Smooth And Gradual
When Manoeuvering With Lift Arms
Raised All New Operators Must Work
The Machine In A Safe Open Area To
Become Familiar With Its Operating
Characteristics.
& WARNING &
Never Step Off The Operator Platform
WJ/h The Load Raised
DIGGING WITH A BUCKET
1. Lower lift arms fully and tilt bucket forward until
cutting edge is on the ground.
2. Drive machine forward slowly and continue to tilt
bucket forward until it enters the ground to desired
depth and then tilt it back a small amount to keep
an even depth, as shown in
Figure 15.
3. Continue driving forward until bucket is full and
then tilt bucket fully back while driving slowly
forward or stopping the machine.
LEVELLING
1. To spread material on uneven ground, raise lift
arms and tilt bucket forward while driving slowly
forward, as in
Figure 16.
JULY 1998
FIGURE 13
FIGURE 14
...
FIGURE 15
FIGURE 16
- 11 -
RAMROD TASKMASTER