RAMROD 905 Скачать руководство пользователя | Manualshive

Страница: 21 / 30

background image

13

LIFT ARM SUPPORT DEVICE

Your  Mini-Skid  is  equipped  with  a  lift
arm support device.  This is bolted to the
bottom  of  the  leveling  arm  on  the  left
side of the machine, and is painted red.

In  order  to  safely  work  underneath  the
lift arms remove the support device from
the  leveling  arm  and  remove  any
attachment  from  the  Mini-Skid.    Raise
the lift arms to their maximum extension
and place the support device onto the lift
cylinder  of  the  Mini-Skid.    Lock  the
support  in  place  using  the  bolt  that
attached it to the leveling arm.

Ensure  the  machine  is  shut  off  before
performing  any  work  on  the  Mini-Skid.
After completing work on the Mini-Skid
remove  the  support  device  from  the  lift
cylinder  and  replace  it  on  the  leveling
arm.

Important

Never Lower The Lift Arms With The

Support Device In Place. Damage To

The Lift Cylinder Will Result.

WARNING

Before Performing Any Work

Underneath The Mini Lift Arms Remove
Any Attachment And Raise The Lift Arm

To Full Height. Use The Lift Arm
Support To Lock The Arms In The

Raised Position

LIFTING THE MINI-SKID

Lift  lugs  are  provided  at  the  top  of  the
Mini-Skid  to  facilitate  lifting  the  Mini-
Skid as a unit.

Both  lift  lugs  must  be  used  in  order  to
properly balance the machine when it is
being  lifted.    Use  a  sling  to  hook  each
lift lug.

Ensure that all lift equipment is rated for
the weight of the Mini-Skid being lifted.
Machine  weights  vary  from  1700  lbs  to
2300 lbs (without attachments).  Contact
Ramrod  Equipment  or  your  nearest
dealer for more information.

Figure 21: The Two Lift Lugs

WARNING

Never Stand Underneath the Mini-Skid

When It Is Being Lifted.

All Lift Equipment Must Be Rated For

The Mini-Skid Weight.

«
...
19
20
21
22
23
...
»

Содержание 905































Отзывы:

Нет отзывов

Похожие инструкции для 905

Бренд: Kubota Страницы: 112

Бренд: Takeuchi Страницы: 18

Бренд: jcb Страницы: 51

Бренд: Toro Страницы: 16

Бренд: Toro Страницы: 16

Бренд: OverBilt Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды