12
1.
To level a filled area, tilt bucket
forward
and
drive
machine
backwards to drag bucket and spread
material, as shown in Figure 17.
2.
Another method of leveling is to
travel forward with bucket down and
level, full of material and pushing
excess into low areas. Depth is
controlled by tilting the bucket
slightly up or down, as in Figure 18.
Figure 17
Figure 18
Figure 19
BACKFILLING
1.
When filling a trench or a hole, drive
up to the hole with bucket low or
push material up to edge, as in
Figure 19.
2.
Tilt bucket forward as soon as it
reaches the edge of the hole and
when necessary raise the arms to
empty the bucket.
TRANSPORTING THE MINI-SKID
Important
Never Tow The Mini-Skid Damage May
Result.
When the machine is transported on a
truck or trailer, proper ramps must be
used for loading.
A Mini-Skid with an empty bucket, or
no
attachment
should
be
driven
backwards up a ramp onto the trailer or
forward down a ramp, as shown in
Figure 20.
After the Mini-Skid is driven onto the
transporting
vehicle,
lower
any
attachments, and install chains to hold
Mini-Skid from moving during sudden
stops or when traveling up and down
grades.
Close the fuel valve when the Mini-Skid
is to be transported. Vibration during
transport could cause the carburetor to
flood.
Figure 20
WARNING
When Transporting On A Road Or
Highway, Be Sure That The Trailer Is
Equipped With Lights And Signs As
Required By Law.
