RAMROD 905 Скачать руководство пользователя | Manualshive

Страница: 10 / 30

background image

2

SAFETY

SAFETY PRECAUTIONS –

CONTINUED

KEEP HANDS, FEET AND CLOTHING AWAY FROM ALL MOVING PARTS AND CYLINDERS.

DO NOT RIDE IN BUCKET.

DO NOT ALLOW MORE THAN ONE PERSON ON THE MINI-SKID AT ANY TIME.

DO NOT ALLOW ANY OTHER PERSON OR ANIMAL CLOSE TO THE MINI-SKID WHILE IN OPERATION.

WATCH FOR OTHER PEOPLE AND EQUIPMENT.

KEEP THE BUCKET LOW WHEN TRAVELLING, TURNING OR CHANGING SPEED.

TRAVEL SLOWLY OVER ROUGH TERRAIN.

BEWARE OF TRENCHES, HOLES AND SIDE SLOPES

DO NOT DRIVE THE MINI-SKID ACROSS STEEP SLOPES.

LOAD, UNLOAD AND TURN AROUND ON FLAT, LEVEL GROUND ONLY.

ENSURE ADEQUATE VENTILATION WHEN USING THE MACHINE IN CONFINED SPACES.

DO NOT CARRY LOAD WITH ARMS IN A RAISED POSITION.  ALWAYS CARRY LOADS CLOSE TO THE
GROUND.  DO NOT STEP OFF PLATFORM WITH THE LOAD RAISED.

TO  AVOID  FREE-FALL  OF  LOAD  WHEN  LOWERING  LIFT  ARMS,  DO  NOT  PUSH  LIFT  ARM  LEVER
FULLY FORWARD.

DO NOT EXCEED RATED LOAD CAPACITY.

ALWAYS LOWER THE BUCKET AND SHUT OFF THE ENGINE BEFORE LEAVING THE MACHINE.

AVOID  PARKING  ON  A  SLOPE.    IF  IT  IS  NECESSARY,  PARK  ACROSS  THE  GRADE,  GROUND  THE
BUCKET AND BLOCK THE WHEELS.

WHEN  HOOKING UP ATTACHMENTS  TO  THE MACHINE, CHECK  TO BE SURE  LOCK  PINS ARE FULLY
ENGAGED.

DO NOT PLACE ANY PART OF THE OPERATOR’S BODY OR ALLOW ANYONE UNDER MINI-SKID ARMS
OR ATTACHMENTS.

DO NOT LUBRICATE, ADJUST OR REPAIR THE MACHINE WITH THE ENGINE RUNNING.

NEVER FUEL A HOT MACHINE.

DO NOT SMOKE WHEN FUELING OR OPERATING THE MACHINE.

ALWAYS READ THE OWNER’S MANUAL FOR PROCEDURES FOR SERVICING AND MAINTENANCE OF
THE MINI-SKID.

REMEMBER,

SAFETY FIRST

.

«
...
8
9
10
11
12
...
»

Содержание 905































Отзывы:

Нет отзывов

Похожие инструкции для 905

Бренд: Bush Hog Страницы: 96

Бренд: Wacker Neuson Страницы: 61

Бренд: New Holland Страницы: 31

Бренд: New Holland Страницы: 51

Бренд: jcb Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды