RAMMER 255E, Руководство оператора

Страница: 48 / 68

COPYRIGHT © 2020 SANDVIK MINING AND CONSTRUCTION OY Page 48 - Maintenance
Routine maintenance 255E
1. ROUTINE MAINTENANCE
1.1 OVERVIEW
This product is a precision made hydraulic machine. Therefore great care and
cleanliness should be taken when handling any of the hydraulic components. Dirt is
the worst enemy in hydraulic systems.
Handle the parts carefully and remember to cover any cleaned and dried parts with
clean lint-free cloth. Do not use anything other than purpose designed materials for
cleaning hydraulic parts. Never use water, paint thinners or carbon tetrachloride.
Components, gaskets and seals in the hydraulic system should be oiled with clean
hydraulic oil before assembly.
1.2 INSPECTION AND MAINTENANCE BY THE OPERATOR
Note: The time intervals given refer to the carrier hours while the attachment is
installed.
EVERY TWO HOURS
■
Grease the tool shank and the tool bushings. See “Manual greasing” on page
39.
■
Observe hydraulic oil temperature, all lines and connections as well as impact
efficiency and evenness of operation.
■
Tighten loose connections.
EVERY 10 HOURS OR AT LEAST ONCE A WEEK
■
Remove the tool retaining pin and the tool and check their condition. Grind the
burrs away if necessary. See “Changing the tool” on page 50.
■
Check that the tool has received sufficient greasing. Grease more frequently, if
necessary.
EVERY 50 HOURS OR AT LEAST ONCE A MONTH
■
Check the tool shank and tool bushings for wear. See “Changing the tool” on
page 50. See “Tool bushing” on page 53.
■
Check the hydraulic hoses. Replace if necessary. Do not let dirt get into the
hammer or hoses.