Hardware Reference Manual
421 Intelligent Serial, 8-Port
Use screws to fasten module into host PCB.
•
Remove the four screws from bottom of the stand-offs of the PMC.
•
Line-up the J1 and J2 connectors on the host CMC to the J1 and J2 connectors on the PMC card.
•
Ensure all connectors are properly aligned before pushing the connectors together.
•
Use the four screws to connect the PMC stand-offs to the host CMC.
DDC No. Rx-URMH 002 Rev -
Issued 12 November 2002
11 of 19
