Ramblewood Green GC2-48N, Руководство пользователя

Страница: 12 / 20

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD
(GROUND) PRONG FROM THIS POER CORD.
Temporary Method (Adapter plugs not permitted Canada)
CAUTION: Attaching the adapter ground
terminal to the wall receptacle cover screw does
not ground the appliance unless the cover screw is
metal, not insulated, and the wall receptacle is
grounded through the house wiring. The customer
should have the circuit checked by a qualified
electrician to make sure the receptacle is properly
grounded.
BATTERY IGNITION (Certain models)
If the auto ignition does not work, make sure that the battery, installed at the back of the cooker,
is not flat and has been installed correctly.
INSTALLING THE BATTERY
Insert a DC1.5V battery into the battery compartment (see below Fig.10, Fig.11) in the cover.
This battery is the power supply for the electronic ignition of gas burners.
Notes for battery installation or replacement:
• Only use a DC 1.5 Volt battery.
• Check for correct polarity ( label to the side of the battery compartment) the electronic ignition
is used
Important notes:
• Remove the battery if the cooker is not going to be used for a long time.
• If the battery leaks, replace it immediately.
Avoid touching the leaked liquid and make sure it does not come into contact with clothes or
other items.
• Clean the battery compartment carefully before installing the new one.
• Note: The battery is a potential source of danger for children. Keep them away.
• Dispose of flat batteries properly.
12