INSTALLATION
MANUAL
INSTRUCTIONS TO INSTALLER
S
Dimension “B” - Provide 2
²
min. (5.08 cm) cabinet clearance to motor for cooling purpose.
S
Installer
- Where possible, 6
²
(15.24 cm) is recommended for motor/blower service.
S
Side Clearance - Grill models installed near a side wall must allow a minimum clearance of 6
²
(15.24 cm) for
maximum performance.
S
Electrical Hook UP - The unit should be properly circuit protected and wired according to local electrical codes. See
electrical wiring information on back. Unit power requirements are located on the data plate.
S
** Access must be provided to remove and empty grease container(s).
8101P421-60
(10-01-00)
Electric Convertible Cooktop
Models JED8130, JED8230 & JED8345
403 WEST FOURTH STREET, NORTH
·
NEWTON, IA 50208
DIMENSIONS SHOWN IN BOTH INCHES AND CENTIMETERS
*Blower may be rotated for horizontal or vertical direction by loosening nuts around blower inlet. Accessible inside ventilation
chamber.
ONLY MODELS WITH GRILLING FEATURE HAVE BEEN ILLUSTRATED
MODEL SERIES: JED8345 TRIPLE BAY
MODEL SERIES: JED8130 & JED8230 DOUBLE BAY
MODELS
A
INCHES
CM
JED8130, JED8230
Double Bay
29 + 1/16
73.66
JED8345
Triple Bay
43 1/4 + 1/16
109.86 + .16
S
NOTICE TO INSTALLER:
Leave these instructions
with the appliance.
S
NOTICE TO CONSUMER:
Retain these instructions
for future reference.
9
3/8
²
23.81 cm
13
²
33.02 cm
TIE DOWN BOLT
ON EACH END
GREASE
CONTAINER
GREASE CONTAINER
BLOWER
WIRING BOX COVER
1
7/8
²
Min.
4.76 cm
(Min.)
Top Front
Edge to
Cutout
9
3/8
²
23.81 cm
21+1/16
²
53.34 cm
7
9/16
²
19.21 cm
Typ. for Container Supplied.
6 1/4
²
(15.88 cm) is required for removal.
Minimum Clearance
Required
