14
HOW TO USE THE COOKTOP
GAS BURNERS
Gas flow to the burners is adjusted by turning the knobs which control the valves. Turning the
knob so that the indicator line points to the symbols printed on the panel achieves the following
functions:
When knob is rotated to the maximum position it will permit the rapid boiling of liquids,
whereas the minimum position allows the simmer warming of food or maintaining boiling
conditions of liquids.
To reduce the gas flow to minimum, rotate the knob further counter-clockwise to point the
Lo
Position.
Other intermediate operating adjustments can be achieved by positioning the indicator
between the HI and Lo positions, and never between the HI and OFF position.
When the range is not being used, set the gas knobs to their OFF positions and also close
the gas shut-off valve placed on the main gas supply line.
LIGHTING GAS BURNERS
Any film or stickers on the cooktop surface should be removed before use.
All operations are performed by means of all control knobs. Knob controls electric
ignition, safety device & flame level.
To ignite,
push and turn the knob for 1~2 seconds in a counterclockwise direction up to
the HI position (Maximum rate), push in and hold the knob until the flame has been lit.
The sparks produced by internal igniter will light the designated burner.
In the event that the local gas supply conditions mark it difficult to light the burner in the
HI position, try again with the knob in Lo position.
To re-light the burner, return the knob to the OFF position and repeat the operation for
light.
To shut off burner, turn the knob in clockwise direction, to OFF position.
