RAM PROMASTER 2018, Руководство пользователя

Страница: 30 / 86

3. Transmission is moved from NEUTRAL to DRIVE or
REVERSE gears.
4. Brake pedal is pressed.
5. Vehicle is on a slope less than 5 percent.
To release the park brake manually, the ignition switch
must be in the ON/RUN position. Put your foot on the
brake pedal, then push the parking brake switch down
momentarily. Once the park brake is fully disengaged, the
BRAKE warning lamp in the instrument cluster and the
LED indicator on the switch will extinguish.
If during drive away the driver pulls the EPB switch (apply
position) the drive away is halted and EPB will be reapplied.
WARNING!
To prevent SERIOUS INJURY or DEATH:
•
NEVER install a driver seat cover or any other
accessory on your driver seat.
•
NEVER make any modifications to the driver seat
components, assembly, or factory installed seat cover.
•
NEVER place objects under the driver seat.
If your driver seat needs service for any reason, take
your vehicle to your authorized dealer immediately.
NOTE:
•
When parking on a hill, it is important to turn the front
wheels toward the curb on a downhill grade and away
from the curb on an uphill grade. The parking brake
should always be applied whenever the driver is not in
the vehicle.
•
The Electronic Park Brake system communicates with the
Driver Presence Detection sensor installed in the driver
seat. The use of seat covers or seat accessories could
prevent the Electronic Park Brake system from working
properly and result in unintended vehicle movement.
WARNING!
•
When leaving the vehicle, always remove the key fob
from the ignition and lock your vehicle.
•
Never leave children alone in a vehicle, or with access
to an unlocked vehicle. Allowing children to be in a
vehicle unattended is dangerous for a number of
reasons. A child or others could be seriously or fatally
injured. Children should be warned not to touch the
parking brake, brake pedal or the gear selector.
(Continued)
28 STARTING AND OPERATING