RAM CHASSIS CAB 3500 2017, Руководство пользователя

Страница: 77 / 276

To Activate
Push the ON/OFF button. The cruise control indicator light in the instrument cluster
display will illuminate. To turn the system off, push the ON/OFF button a second
time. The cruise control indicator light will turn off. The system should be turned off
when not in use.
WARNING!
Leaving the Speed Control system on when not in use is dangerous. You could
accidentally set the system or cause it to go faster than you want. You could lose
control and have an accident. Always leave the system off when you are not using it.
To Set A Desired Speed
Turn the Speed Control on. When the vehicle has reached the desired speed, push the
SET (-) button and release. Release the accelerator and the vehicle will operate at the
selected speed.
NOTE:
The vehicle should be traveling at a steady speed and on level ground before pushing
the SET (-) button.
To Deactivate
A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressure
while slowing the vehicle will deactivate Speed Control without erasing the set speed
memory. Pushing the ON/OFF button or turning the ignition switch OFF erases the set
speed memory.
To Resume Speed
To resume a previously set speed, push the RES (+) button and release. Resume can
be used at any speed above 25 mph (40 km/h).
To Vary The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase speed by pushing the RES (+) button.
The driver’s preferred units can be selected through the instrument panel settings if
equipped. Refer to “Understanding Your Instrument Panel” in the Owner’s Manual
on www.ramtrucks.com/en/owners/manuals for more information. The speed decre-
ment shown is dependant on the chosen speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the RES (+) button once will result in a 1 mph increase in set speed. Each
subsequent tap of the button results in an increase of 1 mph.
• If the button is continually pushed, the set speed will continue to increase until
the button is released, then the new set speed will be established.
O P E R A T I N G Y O U R V E H I C L E
75