RAM CHASSIS CAB 3500 2017, Руководство пользователя

Страница: 64 / 276

NOTE:
Your vehicle is equipped with two key fobs, one key fob can be linked to memory
position 1 and the other key fob can be linked to memory position 2.
The memory seat buttons are located on the outboard side of the driver’s seat cushion.
Programming The Memory Feature
To create a new memory profile, perform
the following:
1. Cycle the vehicle’s ignition to the ON/
RUN position (do not start the engine).
2. Adjust all memory profile settings to
desired preferences (seat, side mirrors,
adjustable pedals and radio station pre-
sets).
3. Push and release the S (set) button on
the memory switch.
4. Within five seconds, push and release
either of the memory buttons (1) or (2).
The instrument cluster display will show
which memory position has been set.
NOTE:
• Memory profiles can be set without the vehicle in PARK, but the vehicle must be
in PARK to recall a memory profile.
• To set a memory profile to your key fob, refer to “Linking And Unlinking The
Remote Keyless Entry Key Fob To Memory” in this section.
Linking And Unlinking The Remote Keyless Entry Key Fob To Memory
Your key fobs can be programmed to recall one of two pre-programmed memory
profiles by pushing the unlock button on the key fob.
NOTE:
Before programming your key fobs to memory the feature has to be selected.
• If your vehicle is equipped with a touchscreen, you must select the “Memory
To Fob” feature through the Uconnect system. Refer to “Uconnect Settings”
in “Understanding Your Instrument Panel” in the Owner’s Manual on
www.ramtrucks.com/en/owners/manuals for further information.
• If your vehicle is not equipped with a touchscreen, you must select the “Key Fob
Linked To Memory” feature through the instrument cluster display. Refer to “Instru-
ment Cluster Display” in “Understanding Your Instrument Panel” in the Owner’s
Manual on www.ramtrucks.com/en/owners/manuals for further information.
Memory Seat Button Location
G E T T I N G S T A R T E D
62