92
GETTING TO KNOW YOUR VEHICLE
Cleat Removal (Standard Box Rail)
To remove the cleats from the utility rail, slide
the cleat forward to access the cut out at the
end of the box rail, then remove the cleat.
Slide Cleat Forward To Remove
Cleat Removal (With Tonneau Cover)
To remove the cleats from the utility rail, remove
the end cap screw located in the center of the
end cap, using a #T30 Torx head driver.
Remove the end cap and slide the cleat off the
end of the rail.
End Cap Screw Location With Tonneau Cover
Cleat Removal (Without Tonneau Cover)
Remove the end cap by pushing upward on the
release button located beneath the end cap
while pulling the cap away from the rail. The
cleat can now be removed by sliding it off the
end of the rail.
End Cap Release Button Without Tonneau Cover
Pull End Cap Away From Rail
RAMBOX — IF EQUIPPED
The RamBox system is an integrated pickup box
storage and cargo management system
consisting of three features:
Cargo storage bins
Cargo divider
Bed rail tie-down system
NOTE:
Bed rail tie-down system is also available for
vehicles not equipped with a RamBox.
21_DT_OM_EN_USC_t.book Page 92
