RAM 1500 2WD 2021 Скачать руководство пользователя страница 184

Страница: 184 / 496

182

STARTING AND OPERATING

To Set A Desired ACC Speed

When the vehicle reaches the speed desired,

push the SET (+) button or the SET (-) button

and release. The instrument cluster display will

show the set speed.

NOTE:

Fixed Speed Cruise Control can be used without

an ACC distance set. To change between the

different modes, push the ACC on/off button

which turns the ACC and the Fixed Speed Cruise

Control off. Pushing the Fixed Speed Cruise

Control on/off button will result in turning on

(changing to) Fixed Speed Cruise Control mode.

If ACC is set when the vehicle speed is below

20 mph (32 km/h), the set speed will default to

20 mph (20 km/h).

NOTE:

Fixed Speed Cruise Control cannot be set below

20 mph (32 km/h).

If either system is set when the vehicle speed is

above 20 mph (32 km/h), the set speed shall

be the current speed of the vehicle.

NOTE:



Keeping your foot on the accelerator pedal

can cause the vehicle to continue to accel

erate beyond the set speed. If this occurs, the

message “ACC DRIVER OVERRIDE” will

display in the instrument cluster display.



If you continue to accelerate beyond the set

speed while an ACC distance is also set, the

system will not be controlling the distance

between your vehicle and the vehicle ahead.

The vehicle speed will only be determined by

the position of the accelerator pedal.

To Cancel

The following conditions cancel the ACC or Fixed

Speed Cruise Control systems:



The brake pedal is applied



The CANC (cancel) button is pushed



The Anti-Lock Brake system (ABS) activates



The trailer brake is applied manually (if

equipped)



The gear selector is removed from the DRIVE

position



The Electronic Stability Control/Traction

Control System (ESC/TCS) activates



The vehicle parking brake is applied



The Trailer Sway Control (TSC) activates



The driver switches ESC to Full Off mode



The braking temperature exceeds normal

range (overheated)

The following conditions will only cancel the ACC

system:



Driver seat belt is unbuckled at low speeds



Driver door is opened at low speeds

WARNING!

In the Fixed Speed Cruise Control mode, the

system will not react to vehicles ahead. In

addition, the proximity warning does not

activate and no alarm will sound even if you

are too close to the vehicle ahead since

neither the presence of the vehicle ahead nor

the vehicle-to-vehicle distance is detected. Be

sure to maintain a safe distance between

your vehicle and the vehicle ahead. Always be

aware which mode is selected.

21_DT_OM_EN_USC_t.book Page 182

Содержание 1500 2WD 2021

















































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2WD 2021

Отзывы:

Похожие инструкции для 1500 2WD 2021

Бренды по названию

Популярные бренды

RAM 1500 2WD 2021, Руководство пользователя

Результаты поиска

Содержание 1500 2WD 2021

Отзывы:

Похожие инструкции для 1500 2WD 2021

Бренды по названию

Популярные бренды