GETTING TO KNOW YOUR VEHICLE
37
Front Heated Seats — If Equipped
The heated seat control buttons are located on the
center stack below the radio screen, or within the
Uconnect system.
Push the heated seat button once to turn the
HI setting on.
Push the heated seat button a second time
to turn the MED setting on.
Push the heated seat button a third time to
turn the LO setting on.
Push the heated seat button a fourth time to
turn the heating elements off.
NOTE:
Once a heat setting is selected, heat will be felt
within two to five minutes.
The engine must be running for the heated
seats to operate.
The level of heat selected will stay on until the
operator changes it.
For information on use with the Remote Start
Rear Heated Seats — If Equipped
On some models, the two rear outboard seats may
be equipped with heated seats. There are two
heated seat switches that allow the rear
passengers to operate the seats independently.
The heated seat switches for each heater are
located on the rear of the center console.
You can choose from HI, MED, LO, or OFF heat
settings. Indicator lights in each switch indicate the
level of heat in use.
Push the heated seat button once to turn the
HI setting on.
Push the heated seat button a second time
to turn the MED setting on.
Push the heated seat button a third time to
turn the LO setting on.
Push the heated seat button a fourth time to
turn the heating elements off.
NOTE:
The level of heat selected will stay on until the
operator changes it.
V
ENTILATED
S
EATS
— I
F
E
QUIPPED
Front Ventilated Seats
The ventilated seat control buttons are located on
the center stack below the radio screen, or within
the Uconnect system. The fans operate at three
speeds, HI, MED and LO.
Press the ventilated seat button once to
choose HI.
Press the ventilated seat button a second
time to choose MED.
Press the ventilated seat button a third time
to choose LO.
Press the ventilated seat button a fourth
time to turn the ventilation off.
NOTE:
The engine must be running for the ventilated
seats to operate.
For information on use with the Remote Start
2