RAM 1500 2021, Руководство пользователя

Страница: 58 / 461

56 GETTING TO KNOW YOUR VEHICLE
Positions one and two can be used if the driver
desires less wiper sensitivity. Position four can be
used if the driver desires more sensitivity. Place
the wiper switch in the O (off) position when not
using the system.
NOTE:

The Rain Sensing feature will not operate when
the wiper switch is in the low or high-speed posi -
tion.

The Rain Sensing feature may not function prop -
erly when ice, or dried salt water is present on
the windshield.

Use of Rain-X or products containing wax or sili -
cone may reduce Rain Sensing performance.

The Rain Sensing feature can be turned on and
off using the Uconnect system
Ú
page 216.
The Rain Sensing system has protection features
for the wiper blades and arms, and will not operate
under the following conditions:

Low Ambient Temperature — When the ignition
is first placed in the ON position, the Rain
Sensing system will not operate until the wiper
switch is moved, vehicle speed is greater than
3 mph (5 km/h), or the outside temperature is
greater than 32°F (0°C).

Transmission In NEUTRAL Position — When the
ignition is ON, and the automatic transmission
is in the NEUTRAL position, the Rain Sensing
system will not operate until the wiper switch is
moved, vehicle speed is greater than 3 mph
(5 km/h), or the gear selector is moved out of
the NEUTRAL position.

Remote Start Mode Inhibit — On vehicles
equipped with Remote Start system, Rain
Sensing wipers are not operational when the
vehicle is in the Remote Start mode.
CLIMATE CONTROLS
The Climate Control system allows you to regulate
the temperature, air flow, and direction of air
circulating throughout the vehicle. The controls are
located on the touchscreen (if equipped), on the
sides of the touchscreen or on the instrument
panel below the radio.
A
UTOMATIC
C
LIMATE
C
ONTROL
D
ESCRIPTIONS
A
ND
F
UNCTIONS
Uconnect 4/4C/4C NAV With 8.4-inch Display Automatic
Temperature Controls
Uconnect 4C NAV With 12-inch Display Automatic
Temperature Controls
NOTE:
Icons and descriptions can vary based upon
vehicle equipment.
MAX A/C Button
Press and release the MAX A/C button on
the touchscreen to change the current
setting to the coldest output of air. The
MAX A/C indicator illuminates when MAX
A/C is on. Pressing the button again will cause the
MAX A/C operation to exit.
NOTE:

MAX A/C sets the control for maximum cooling
performance.

The MAX A/C button is only available on the
touchscreen.