RAM Commercial PROMASTER 2022, Руководство пользователя

Страница: 58 / 284

56 GETTING TO KNOW YOUR INSTRUMENT PANEL

Right Arrow Button
Push and release the right arrow button to
access the information screens or submenu
screens of a main menu item.

Down Arrow Button
Push and release the down arrow button to
scroll downward through the main menu and
submenus.

OK Button
Push the OK button to access/select the infor
-
mation screens or submenu screens of a main
menu item. Push and hold the OK button for one
second to reset displayed/selected features
that can be reset.
NOTE:
For vehicles with a 3.5 inch instrument cluster
display, press the OK button to toggle between
mph or km/h.
For Screen Setup:

OK button allows user to enter menu and
submenus.

Within each submenu layer, the up and
down arrow buttons will allow the user to
select the item of interest.

Pushing the OK button makes the selection and
a confirmation screen will appear (returning the
user to the first page of the submenu).

Pushing the left arrow button will exit each
submenu layer and return to the main menu.
C
HANGE
E
NGINE
O
IL
— I
F
E
QUIPPED
Your vehicle is equipped with an engine oil change
indicator system. The “Change Engine Oil”
message will display in the instrument cluster
display. The engine oil change indicator system is
duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon
your personal driving style.
Unless reset, this message will continue to display
each time you turn the ignition switch to the ON/
RUN position. To turn off the message temporarily,
push and release the OK button. To reset the oil
change indicator system (after performing the
scheduled maintenance), refer to the following
procedure.
1. Turn the ignition switch to the ON position (do
not start the engine).
2. Fully push the accelerator pedal slowly, three
times, within 10 seconds.
3. Turn the ignition switch to the OFF position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
M
AIN
M
ENU
NOTE:
All of the following items are accessed by pressing
the OK button.
Home
Speedometer Graph
This uses the round bar graph filling to visually
represent current speed. When a speed control
system is active, the graph also provides visual
cues for the different states of that particular
speed control system.
Trip
Vehicles with 7 Inch Instrument Cluster Display
Access to trip information is available through the
following submenus.

Instant Consumption – Shows the instant
consumption in real time (MPG or L/100 km or
km/L).

Average Consumption – Shows the average
consumption (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.

Distance – Shows the total distance (mi or km)
traveled for Trip A or Trip B since the last reset.

Average Speed – Shows the average speed
(MPH or KM/H) of Trip A or Trip B since the
last reset.
22_VF_OM_EN_USC_t.book Page 56