RAM Commercial PROMASTER 2022, Руководство пользователя

Страница: 159 / 284

SAFETY 157

FCW may not react to irrelevant objects such as
overhead objects, ground reflections, objects
not in the path of the vehicle, stationary objects
that are far away, oncoming traffic, or leading
vehicles with the same or higher rate of speed.

FCW will be disabled with the unavailable
screens
Ú
page 270.
Turning FCW On Or Off
The FCW button is located in the Uconnect display
in the control settings
Ú
page 123.

To turn the FCW system on, press the forward
collision button once.

To turn the FCW system off, press the forward
collision button once.
NOTE:

Changing the FCW status to “Off” deactivates
the system, so no warning or active braking will
be available in case of a possible collision.

Changing the FCW status to “Only Warning”
prevents the system from providing limited
active braking, or additional brake support if the
driver is not braking adequately in the event of
a potential frontal collision, but maintains the
audible and visual warnings.

When FCW status is set to “Warning and
Braking”, this allows the system to warn the
driver of a possible collision with the vehicle in
front using audible/visual warnings and it
applies autonomous braking.

The FCW system state is kept in memory from
one ignition position to the next. If the system is
turned off, it will maintain its status in the next
key cycle.
FCW Braking Status And Sensitivity
The FCW Sensitivity and Active Braking status are
programmable through the Uconnect system
Ú
page 123.

Far

When the sensitivity of FCW is set to the
“Far” setting and the system status is
“Only Warning”, this allows the system to
warn the driver of a possible more distant
collision with the vehicle in front using
audible/visual warnings.

More cautious drivers that do not mind
frequent warnings may prefer this setting.
NOTE:
The “Far” setting may result in a greater number of
FCW possible collision warnings experienced.

Medium

When the sensitivity of FCW is set to the
“Medium” setting and the system status is
“Only Warning”, this allows the system to
warn the driver of a possible collision with
the vehicle in front using audible/visual
warnings.
WARNING!
Forward Collision Warning (FCW) is not intended
to avoid a collision on its own, nor can FCW
detect every type of potential collision. The driver
has the responsibility to avoid a collision by
controlling the vehicle via braking and steering.
Failure to follow this warning could lead to
serious injury or death.
6
22_VF_OM_EN_USC_t.book Page 157