Rale Industries ST120 2021, Инструкция по установке

Страница: 9 / 22

5 2021 RALE® ST120 INSTALLATION GUIDE
B
i k e
T
e a r
D
o w n
CAUTION
It is essential to utilize the host bike user's/owner's manual and/or
service manual for detailed disassembly procedures.
If using a motorcycle stand and/or lift, follow the stand's/ lift's safety
guidelines and properly secure the bike from tipping, shifting, or
falling.
Put the bike on a frame stand. An adjustable stand is best for the
track kit installation.
Refer to the ST120 User’s Manual for detail drawings and parts ID.
Start by removing the following parts from the host bike:
• Drive chain
• Rear shock (keep the
bolts for later use)
• Rear swingarm linkage from
frame (leave attached to
the swingarm)
• Swingarm (keep the pivot
axle and nut for later use)
• Rear brake line, master
cylinder, and lever
• Front brake line, master
cylinder, and lever
Do not remove the front wheel at this time
Modify the air box as needed to clear any interference the RALE
Track Kit may cause. It may be necessary to change or modify the
air intake system of the host bike.
a
i r
B
ox
r
e m o va l
/ m
o D i f i c aT i o n