Rale Industries ST120 2021, Инструкция по установке

Страница: 15 / 22

11 2021 RALE® ST120 INSTALLATION GUIDE
9. Install o-rings on the inside spacers.
10. Place inside spacers in yoke, make sure the o-rings are seated all
the way into the yoke.
11. Place outside spacers in yoke, the seal should hold these in
place.
12. Depending on the fit kit being installed, identification grooves are
cut into the spacers. To see spacer placement, refer to the model
specific Fit Kit Guide, shipped with the Fit Kit.
CAUTION
Carefully review the model specific Fit Kit Guide for the
application to ensure all spacers are installed in the correct
location.