Rale Industries ST120 2021, Инструкция по установке

Страница: 17 / 22

13 2021 RALE® ST120 INSTALLATION GUIDE
S
h o c k
i
n S Ta l l aT i o n
1. With all the spring pre-load relived, compress the shock.
2. Insert the shock rotator axles into bellcrank B. Do not use force,
this will damage the bushings in the shock rotator.
3. Use blue Loctite® 243 on the four screws that hold the shock
rotator axles. Torque to 100 in-lb.
4. With the bike on level ground, not supported by any stand, set the
spring pre-load:
• Set the handlebars straight
• Set the bike stand so the forks are at 62°
• Place a level on the center channel
• Increase the pre-load until the center channel is level
Check level