RAK7249/58
8
RAK LoRaWAN Industrial Gateway Configuration Guide
The same statistics as with the WAN Interface are available. It is here that you set
the
APN
,
User
, and
Password
. The gateway metric determines the priority of this interface,
compared with the other connectivity options. The lower the value the higher the priority.
3.2.3
Wi-Fi
Figure 5 |
Wi-Fi Interface
Enabling/Disabling the Wi-Fi is done from this page via the blue button at the top.
Additionally you can pick a radio channel or leave it on Auto configuration. The Wi-Fi can
work in one of two modes:
Access Point:
By default, there is no password. One can access the Web UI via the IP address:
192.168.230.1 once connected to the AP. The SSID is RAK72xx_xxxx by default.
Client:
Choose this option to use Wi-Fi as a backhaul for the Gateway. You need to manually enter
the SSID, Encryption method and the Key itself.
Note: Make sure to click the “Switch mode” button first in order to input the corresponding
parameters, before saving and applying the changes.
3.2.4
Firewall
You can configure a number of settings including, but not limited to: Zones, Port Forwarding,
NAT, etc.
