RAK4200 Breakout Module
15
Next, we need to set the authentication parameters. You can copy those from the
Device Overview page (Figure 11). Replace the XXXX in the commands below
with your particular set of symbols.
Set the
Device EUI
:
at+set_config=lora:dev_eui:XXXX
Set the
Application EUI
:
at+set_config=lora:app_eui:XXXX
Set the
App Key
:
at+set_config=lora:app_key:XXXX
Note
Execute the following commands one by one and in the order given.
