RAK4200 Breakout Module
12
Figure 10 |
Device Overview page
Take note of the
Activation Method
which is set to
OTAA
by default (Figure 10).
This is one of two options, ABP being the second one. We will provide
instructions on both methods in the following sections, starting with OTAA.
OTAA mode
OTAA stands for Over The Air Activation. We will not delve into details, however
the most important thing from practical perspective is that a device needs to have
the 3 parameters (
Device EUI, Application EUI, and App Key
) we already
explained in brief in the following section set correctly in order for the LoRa®
Server to allow it to access to the network.
These can be obtained from the Device Overview page, where they are grouped
one after the other for convenience (Figure 11).
