Documentation Center
Figure 1: RAK19016 connected to a WisBlock Base board with Power Slot
📝
NOTE
The voltage of the battery must not exceed 4.3 V.
RAK19016 Supplemented by RAK5804 to Support
WisBlock Core Reprogramming
Since there is no USB connector on RAK19016, the only way to upload the code is by using RAK5804.
3 9 9
3 9 9
3 9 9
39
9
39
9
Figure 2: RAK19016 and RAK5804 connection to WisBlock Base
Assembling and Disassembling of WisBlock Modules
Assembling Procedure
The RAK19016 module can be mounted on the power slot of the WisBlock Base board, as shown in Figure 3.
Also, always secure the connection of the WisBlock module by using compatible screws.
