Documentation Center
Figure 3: RAK19016 mounting connection to WisBlock Base module
Disassembling Procedure
The procedure in disassembling any type of WisBlock module is the same.
1. First, remove the screws.
Figure 4: Removing screws from the WisBlock module
2. Once the screws are removed, check the silkscreen of the module to find the correct location where force can
be applied.
Figure 5: Detaching silkscreen on the WisBlock module
3. Apply force to the module at the position of the connector, as shown in Figure 6, to detach the module from the
baseboard.
