Documentation Center
Figure 2: RAK13600 on WisBlock Base with WisBlock Core
Assembling and Disassembling of WisBlock Modules
Assembling
As shown in Figure 3, the location for the IO slot is properly marked by silkscreen. Follow carefully the procedure
defined in
WisBlock Base module assembly/disassembly instructions
to attach a WisBlock module. Once
attached, carefully fix the module with three M1.2 x 3 mm screws compatible with the module.
Figure 3: RAK13600 connection to WisBlock Base Board
Disassembling
The procedure in disassembling any type of WisBlock modules is the same.
1. First, remove the screws.
Figure 4: Removing screws from the WisBlock module
