Documentation Center
Figure 4: Connecting the PoE adapter
Weather Protection
To better protect the Ethernet cable gland and the antenna connector from the weather, you need to cover them
with PVC tape.
1. Clean the surface area of the connector that will be wrapped. Wrap a layer of PVC tape with a 50% overlap
according to the rotation direction of the connector. Continue wrapping the PVC tape to about 10 mm below the
end of the connector.
Figure 5: Wrapping with PVC tape
2. Cut off about 50 cm waterproof tape. Stretch it to double the length. Wrap three layers around the connector
with a 50% overlap. Hold the tape in place with your hand for a few seconds.
